Use and Care Manual

1. Prepare a sanitizing solution made of 1oz (29ml) of household bleach and

2 gallons (7.5L) of hot water 95ºF (35°C) to 115ºF (46°C). Remove the

flake covers and slideway from the water bin and wipe the entire bin

inside and out, covering all surfaces.

2. Fill a spray bottle with the sanitizing solution and spray all corners and

edges making sure to cover all surfaces with the solution. Soak the flake

cover and slideway in the solution and put back in place after drying.

3. Allow the solution to be in contact for at least 3 minutes, and then dry.

4. Repeat step 6 to rinse the ice making system one more time.

5. Reassemble the front cover.

6. Turn on the power. The machine will return to the normal ice making

operation. Discard the first batch of ice.

Control Box (See diagram on page 30.)

Instructions for LEDs and buttons:

1. RED LED: Ice full indicator light.

When this LED is lit, the ice storage bin is full of ice and the unit will stop

working. When ice cubes are taken out of the ice storage bin, clearing the

sensor, the red LED will flash for 3 minutes. Then the unit will restart and

return to the ice making mode.

2. GREEN LED: Ice making indicator light.

When this LED is lit (solid), the unit is working in the ice making mode

controlled by a temperature probe on the evaporator. When the green LED is

flashing, the unit is working in the ice making mode controlled by a fixed

timer.

3. YELLOW LED: Ice harvest indicator light.

When this LED is lit (solid), the unit is working in the ice harvest mode

controlled by a temperature probe on the evaporator. When the yellow LED is

flashing, the unit is working in the ice harvest mode controlled by a fixed

timer.

4. CLEAN button: When this button is pressed, the unit enters the cleaning

mode. The green and yellow LEDs flash together. To stop the cleaning mode,

just press the button again.

5. MODE button: Mainly for service. When this button is pressed, it can change

from ice making mode to ice harvest mode, or from ice harvest mode to ice

making mode. You can judge the mode from the status of the green and yellow

LEDs.

6. ICE SIZE ADJUSTMENT: Turn the screw clockwise, and the size of

individual ice cubes will be larger in the next cycle; the cycle time will be