User Manual

INSTALLATION INSTRUCTIONS

Crescent Ice Maker Instruction Manual

• It is always a good idea to lter the water. A water lter can remove taste and odors as well as

particles. Where water is very hard, softened water may result in white, mushy cubes that stick

together. Deionized water is not recommended.

• Make certain that the water supply hose is not pinched, kinked or damaged during installation.

• Check for leaks after the water line is connected.

• Do not kink, pinch or damage the power supply cord between the ice maker and wall or cabinet.

• Before connecting the ice maker to the power source, let it stand upright for approximately 4

hours. This will reduce the possibility of a malfunction in the cooling system from handling during

transportation.

BUILT-IN INSTALLATION

WARNING

DO NOT install in spaces containing gasoline engines, fuel tanks or fuel line ttings. This

device does not meet federal requirement for ignition protection. Failure to comply could

result in injury or death.

A built-in installation will allow you to install the ice maker under a counter or in a kitchen cabinet

provided the required clearance space around the ice maker is respected.

Location requirements:

Required Cabinet Opening : 14-1/4”(362 mm) W x 24-5/8” (626 mm) H (FLUSH TO CABINET)

15-1/8”(384 mm) W x 24-5/8” (626 mm) H (FLUSH TO DOOR)