User Manual

INSTALLATION INSTRUCTIONS
14
© 2019 The Legacy Companies
Crescent Ice Maker Instruction Manual
ELECTRICAL CONNECTION
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
For personal safety, this appliance must be properly grounded. The power cord of this appliance is
equipped with a 3-prong grounding plug that mates with a standard 3-prong grounding wall outlet to
minimize the possibility of electric shock hazard from the appliance. Have the wall outlet and circuit
checked by a qualied electrician to make sure the outlet is properly grounded. When a standard
2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a
properly grounded 3-prong wall outlet.
The ice maker should always be plugged into its own individual electrical outlet. The outlet must have
a voltage rating that matches the rating label on the appliance. This provides the best performance
and also prevents overloading boat wiring circuits, which could cause a re hazard from overheated
wires. Never unplug your ice maker by pulling on the power cord. Always grip the plug rmly and pull
straight out from the outlet. Repair or replace immediately all power cords that have become frayed or
otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at
either end. When moving the ice maker, be careful not to damage the power cord.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly
qualied persons in order to avoid a hazard.
The 110V model has a xed power cord with NEMA 5-15P power plug. The 220V model has a
detachable power cord and has 4 options for a power plug.
DESCRIPTION
Power Cord 220 - 240V Great Britain/Ireland
Power Cord 220 - 240V Australia/New Zealand/China
Power Cord 220 - 240V Continental Europe
Power Cord 220 - 240V India
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly recommended that you do
not use an extension cord with this ice maker.
THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY IF THE ABOVE INSTRUCTIONS ARE
NOT FOLLOWED.