User Manual

INSTALLATION INSTRUCTIONS
16
© 2019 The Legacy Companies
Crescent Ice Maker Instruction Manual
To remove the door from the hinges:
1. Using a athead screwdriver, separate the hinge axis from Hinge 1. Set aside.
2. Open the door about 20 degrees around the axis of Bottom Hinge 2, then lift the door off Bottom
Hinge 2.
3. Remove the right latch hook located in the right bottom of the door and the plastic cap located in
the left bottom of the door.
4. Install the left latch hook (in the accessory bag) to the left bottom of the door where the plastic cap
was placed and put the plastic cap on the other side.