User Manual

Crescent Ice Maker Instruction Manual

OPERATING

INSTRUCTIONS

ICE MAKING INSTRUCTIONS

1. Turn the unit on by pressing the Power button.

2. Water will be pumped from the water valve to the ice maker tray for freezing. The rst cubes may

be small because of air in the water line. Later cubes will be of standard crescent-type size.

3. Once the freezing process is complete, the ice shovel will turn and push the ice cubes down to the

ice basket.

• NOTE: Although the unit has been tested and cleaned at the factory,

due to long-term transit and storage, discard all ice cubes made

during the rst 3 hours of operation.

• When the ice bucket is full, the ice maker tray will automatically

shut off. When ice cubes are melted or removed, the ice maker will

resume its operation.

• Ice delivery may be interrupted by raising the metal arm into an

upright position.

• If the ice maker is not used regularly, it is recommended that the ice bucket be emptied

periodically to ensure ice freshness.

• Sometimes the ice cubes may appear cloudy. This appearance is due to the rapid freezing

of the ice cube. This cloudiness is trapped air in the water and does not affect the taste and

quality of the ice.

• The air intake and exhaust should be kept free of dust and lint to allow free airow.

• This unit should be defrosted approximately every 4-6 weeks or when frost on the ice maker

wall is excessive or 1/4” thick. To defrost, turn the unit off, remove the ice cubes, and keep the

ice maker door open at least two inches.

• Do not place cans or bottles in the ice compartment because they will freeze.

• Never turn the water supply tap off when the ice maker is working.

• Never touch the evaporator when the unit is running.

• Keep the ice maker door closed to reduce melting and to ensure proper ice formation.