Instructions / Assembly

1. Mounting surface must be capable of supporting the
fixture. For plaster board ceiling, #8 screw eye
hooks with plastic anchors are included or
expansion bolts may be used (not included). If
installed onto a plaster board surface, we
recommend minimum 3/8” thick.
NOTE: You are responsible for secure installation.
2. Install the 2 plastic anchors 47 1/4" apart, then
screw the eye hook into each anchor.
3. Install one “S” hook into each end of the chain, then
crimp the “S” hook end which is attached to the chain
with pliers.(Leave one side open from the “S” hook)
Repeat step for the second chain provided.
4. Install the “S” hook from one end of the chain into the
end cap of the LED lamp, then crimp the hooks end
with pliers. Repeat same step for the opposite side.
5. Install the LED lamp with chains, one end at a time on
to each screw eye hook. Crimp screw eye hook if
needed.
Linking Multiple Shoplights
6. Plug the power supply cord into the electrical outlet.
Installation (Continued)
LED Shop Light Installation Instructions
Crimp
S-hooks
with
pliers.
Connect to
electrical outlet.
Link shop lights
together if
needed. Secure
loose cord slack.
CAUTION: Link a maximum
of 4 shop lights together. Do
not use shop light outlets to
power anything other than
these style shop lights.