R EVOLUTION OF POWER MEAN MACHINE SUBWOOFERS MW10D2 / MW10D4 / MW12D2 / MW12D4 MW15D2 / MW12SQD4
autotek MEAN MACHINE SERIES SUBWOOFERS Congratulations on your purchase of the new Autotek Mean Machine Series High Power subwoofer system. The MW series subwoofers offer superior sonic accuracy, high power handling, great sound quality with exotic build materials and outstanding good looks. 2.
SUBWOOFER INSTALLATION AND WIRING DIRECTIONS Enclosure Materials Typically, 5/8” or 3/4” MDF (Medium Density Fiber Board) is best for most applications. 3/4” MDF is recommended. Enclosure Build Materials Connecting joints need to be glued and screwed to ensure no air escapes and joints do not separate under high pressure. Mitered and rabbit joints also help to ensure the enclosure joints are secure. Bracing Internal bracing is also recommended to prevent flexing and to strengthen the enclosure.
3 4+4
4
Glossary of Terms Q The energy losses of relative damping (ratio of stored to dissipated energy or ratio of reactive to resistive energy). Fs Free air resonance of driver in Hz. Qms Mechanical Q. Vas Volume of air equivalent to driver from the rest position. Cms Mechanical compliance of a loud speaker piston. Mms Moving mass of total loud speaker piston assembly. Xmax The maximum linear excursion of a loud speaker. Sd Surface area of the cone. Dia The piston diameter of a loud speaker.
MW10D4 / MW12D4 / MW12SQD4 DVC 4-Ohms PARALLEL 2-Ohms SERIES 8-Ohms autotek autotek + + autotek autotek autotek autotek + - + + + - autotek autotek PARALLEL COILS / PARALLEL SUBS 1-Ohm autotek autotek + - + + + + autotek autotek autotek autotek autotek autotek SERIES COILS / PARALLEL SUBS 4-Ohms autotek autotek + + + + autotek autotek autotek autotek autotek + 6 autotek
MW10D2 / MW12D2 / MW15D2 DVC 2-Ohms PARALLEL 1-Ohms SERIES 4-Ohms autotek autotek + + autotek autotek autotek autotek + - + + + - autotek autotek PARALLEL COILS / PARALLEL SUBS 0.
Subwoofer Dimensions B A Model A - Cut Out Diameter B - Mounting Depth MW10 9.1” / 230mm 6.2” / 157.48mm MW12 11” / 280mm 6.9” / 175.26mm MW15 13.8” / 350mm 8” / 203.2mm MW12SQ 11.1” x 11.1” 282 x 282mm 7.3” / 185.
Maxxsonics Limited Warranty As the manufacturer of Maxxsonics, MB Quart, Autotek, Crunch and Hifonics car audio products, Maxxsonics USA Inc. Warrants to the original consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Year from date of purchase. All other parts and accessories of the system are warrantied to be free from defects in material and workmanship for one (1) year from date of purchase.
