Instructions / Assembly
Table Of Contents
- PRECAUTIONS:
- IMPORTANT INFORMATION
- 1.1 Pre-Install Checklist & Safety Warning
- 1.2 Sanitation Warning: Safe Use of Ozone
- 1.3 Electrical Warning
- 1.4 Specs
- ASSEMBLY
- 2.1 Product Diagram
- 2.2 Packing List
- 1pc Cold Plunge Chiller & Spa System
- 1pc Filter Wrench
- 3pc 20 Micron Filter Cartridge
- 2pc Quick-Connect Hoses
- 2pc Hose Adapters
- 6pc Rubber Gasket Seals
- Note: Your cold plunge has been assembled and tested prior to packaging.
- 2.3 Assembly Details
- 2.4 Assembly Diagram
- OPERATING THE COLD PLUNGE CHILLER & SPA SYSTEM
- 3.1 Control Panel Introduction
- 3.2 Interface Overview
- 3.3 App Set Up
- Note: Tuya can only support 2.4G WIFI signal. Before connecting your phone to the chiller, please confirm that the Wi-Fi___33 used by your phone is in the 2.4G frequency band. It will not be able to connect to the chiller, if it is in the 5G frequen...
- 3.4 Settings & Preferences
- 3.5 Water Maintenance
- 3.6 Unit Maintenance
- Warranty Information
- General Conditions:
3.4 Settings & Preferences
Step 1: Test your GFCI (reset) button
o Locate the GFCI reset button on the back of your chiller.
o After the unit it turned on, hit the reset button.
o Test to make sure the unit properly shuts down / reboots.
IMPORTANT: If the unit does not reset. Shut the unit off and
contact support immediately.
Step 2: Set a timer
o We highly recommend setting your chiller on a timer.
Reducing the runtime will dramatically improve the lifespan of
your chiller. We recommend scheduling 8 hours of downtime
per day.
Step 3: Turn on Auto Power
o This ensures your chiller will automatically maintain the set
temperature.