Instructions / Assembly
Table Of Contents
- PRECAUTIONS:
- IMPORTANT INFORMATION
- 1.1 Pre-Install Checklist & Safety Warning
- 1.2 Sanitation Warning: Safe Use of Ozone
- 1.3 Electrical Warning
- 1.4 Specs
- ASSEMBLY
- 2.1 Product Diagram
- 2.2 Packing List
- 1pc Cold Plunge Chiller & Spa System
- 1pc Filter Wrench
- 3pc 20 Micron Filter Cartridge
- 2pc Quick-Connect Hoses
- 2pc Hose Adapters
- 6pc Rubber Gasket Seals
- Note: Your cold plunge has been assembled and tested prior to packaging.
- 2.3 Assembly Details
- 2.4 Assembly Diagram
- OPERATING THE COLD PLUNGE CHILLER & SPA SYSTEM
- 3.1 Control Panel Introduction
- 3.2 Interface Overview
- 3.3 App Set Up
- Note: Tuya can only support 2.4G WIFI signal. Before connecting your phone to the chiller, please confirm that the Wi-Fi___33 used by your phone is in the 2.4G frequency band. It will not be able to connect to the chiller, if it is in the 5G frequen...
- 3.4 Settings & Preferences
- 3.5 Water Maintenance
- 3.6 Unit Maintenance
- Warranty Information
- General Conditions:
PRECAUTIONS:
1. Do not block or obstruct the cooling fans or vents of the chiller. This will affect the
operation and efficiency of the chiller and possibly cause damage.
2. It is important to maintain and regularly check and clean the chiller and filter device.
3. To avoid personal injury or damage to the chiller, do not touch the fan during
operation.
4. Make sure that the chiller is plugged into a circuit with the properly rated voltage.
5. Do not touch the RCD switch or the electrical components during operation of the
chiller.
CAUTIONS:
• Do not turn the chiller upside down.
• Do not use chiller without the filter element installed
• Please leave 36” or more of space in front of the cooling fan
Working Temperature: 1°C~45°C (34°F~113°F)
Storage Temperature: 10°C~50°C(50°F~122°F)
Storage Relative Humidity: 20%~85%
(Make sure that there is no water in the internal pipeline of the chiller before storage)