Instructions / Assembly
Table Of Contents
- PRECAUTIONS:
- IMPORTANT INFORMATION
- 1.1 Pre-Install Checklist & Safety Warning
- 1.2 Sanitation Warning: Safe Use of Ozone
- 1.3 Electrical Warning
- 1.4 Specs
- ASSEMBLY
- 2.1 Product Diagram
- 2.2 Packing List
- 1pc Cold Plunge Chiller & Spa System
- 1pc Filter Wrench
- 3pc 20 Micron Filter Cartridge
- 2pc Quick-Connect Hoses
- 2pc Hose Adapters
- 6pc Rubber Gasket Seals
- Note: Your cold plunge has been assembled and tested prior to packaging.
- 2.3 Assembly Details
- 2.4 Assembly Diagram
- OPERATING THE COLD PLUNGE CHILLER & SPA SYSTEM
- 3.1 Control Panel Introduction
- 3.2 Interface Overview
- 3.3 App Set Up
- Note: Tuya can only support 2.4G WIFI signal. Before connecting your phone to the chiller, please confirm that the Wi-Fi___33 used by your phone is in the 2.4G frequency band. It will not be able to connect to the chiller, if it is in the 5G frequen...
- 3.4 Settings & Preferences
- 3.5 Water Maintenance
- 3.6 Unit Maintenance
- Warranty Information
- General Conditions:
IMPORTANT INFORMATION
1.1 Pre-Install Checklist & Safety Warning
Failure to adhere to the safety instructions and guidelines provided in this warning could result in serious injury or
even death. Cold water immersion, electrical installation, and usage entail inherent risks that require careful attention
and precautionary measures.
o Dedicated Breaker:
Warning: Use a dedicated circuit breaker for your cold plunge to prevent electrical overload.
Consult a licensed electrician to ensure proper installation.
o GFCI Wall Outlet:
Warning: Use a Ground Fault Circuit Interrupter (GFCI) wall outlet for your cold plunge to reduce
the risk of electrical shock. Professional electrical installation is advised.
o Clearance from Walls and Objects:
Warning: Do not install the chilling system in closets, cabinets, or other enclosed spaces. Maintain
a minimum clearance of 3 feet between all components and utilities of your cold plunge and the
nearest walls or objects. Adequate spacing ensures proper ventilation and access for maintenance.
o Safe Installation Location:
Warning: Install the unit in a safe location that is not easily accessible to children. Ensure that the
unit is out of their reach and properly secured to prevent unauthorized access.
o Waterproof Flooring:
Warning: Only install your cold plunge and chiller on a waterproof floor to prevent water damage to
your surroundings. Failure to do so may result in property damage.
o Minimum Distance from Outlets:
Warning: Maintain a minimum distance of at least 6 feet between your cold plunge unit and the
nearest plug or outlet. This prevents potential electrical hazards.
o Hose Fitting Check:
Warning: Before turning on the power, ensure that all hose fittings are properly connected to
prevent water leakage that could lead to damage. Failure to do so may result in water damage to
your property.
o Avoid Bending Hose Lines to Prevent Water Flow Restrictions and Freezing:
Warning: bending or kinking the hose lines connected to your chiller can lead to serious issues with
water flow and potential freezing of pipes within the chiller. It is imperative to handle and route the
hose lines carefully to ensure smooth water circulation and prevent damage.
o Professional Installation
We strongly recommend professional installation by licensed experts, particularly for electrical and
plumbing components, to ensure compliance with safety codes and regulations.