Use and Care Manual

17
6. When the temperature is at the set-up value, the digital control will maintain the set temperature.
The emitters will stop generating heat. Once the inside temperature drops approximately 4
degrees, the heat will again be generated by the emitters. The inside temperature will always
remain around the set-up value.
7. Reading lamps and/or roof lamps and/or color therapy lamps are operated by pressing the
button located on the control panel. These lamps are offered on some models and are not
available on all models. When you press the button once, the interior light will come ON.
When you press the button twice, the interior light will turn OFF. When you press the
button three times, the interior white light and exterior white lights will come ON. When you press
the button four times, both the interior and exterior lights will turn OFF.
8. Chromotherapy/Color Therapy Lighting (optional/not available on all models) can be
operated as follows. First, you will need to install the battery. Once the battery has been inserted
into the remote, you are ready to operate the chromotherapy/color therapy lighting system. Press
the button on the sauna control panel. The white light will come on. While pointing the
remote at the ceiling light, you can press any of the colors on the remote and that color will be
displayed. You can use the SHADE button on the remote to go through a sequence of colors. If
you want to turn the light off during your sauna session, you can press the POWER button on the
remote. Please note: You must be inside the sauna room for the remote to work.
9. Bluetooth can be used on the sauna room. You first will need to pair your device with the sauna
room. Open your device’s Settings Menu and then locate and open Bluetooth. You will find
iSauna or BT100 or Bluetooth. Now you can pair your device. Once pairing is successful, your
device will be connected. Please note that you must unpair/disconnect from Bluetooth if your
sauna model has the optional MP3 Jack at the ceiling and you choose to use the Aux Wire to
connect to the speaker system. If you need to reset the Bluetooth/Aux system, you can do so by
unplugging the sauna’s power cord for 15 minutes.
Control Panel (1.4)
Power On/Off: Press to control the main power of the sauna
Power Indicator: Indicates the status of the sauna’s main power
Work Start/Stop: Press to control the working functions of the
sauna
Work Indicator: Indicates the working status of the sauna
Heat Indicator: Indicates the status of heating function
Light: Press to control the lighting function
Time Display: Displays the heating time of the sauna in minutes
Time: Press to adjust the setting of the timer
Temperature Display: Displays the actual interior temperature of the
sauna room in
0
C/
0
F
Temperature: Press to adjust the temperature setting
0
C/
0
F: Press to change the temperature display between
0
C/
0
F
Bluetooth: Control panel can be connected to devices to play
music