Manualshelf

Use and Care Manual

ManualsBrandsMaxxus ManualsHome SpasLifeSauna 2-Person Indoor Hemlock Infrared Sauna with 7 Ultra Low EMF Carbon Infrared Therapy Heaters and Sound System
11121314151617181920
14
Figure 4
V. Panel Descriptions
For easier assembly, please understand and distinguish the differences between
each panel.
A. Floor Panel
When the FLOOR PANEL faces upward, the surface will be flat. (see
Figure 7)
B. Understanding the Difference Between the Top and Bottom of the
Wall Panels
The (4) panels are in the upright position when the moldings are at the
top. The moldings will be facing inward towards the interior of the
sauna room. You will see the heat emitter cords coming from the
topside of the wall panels. (see Figure 5)
Molding
Figure 5
C. Rear Panel
The REAR PANEL is the panel with the buckles. The buckles are
mounted on the exterior side of the REAR PANEL. (see Figure 6)