Manualshelf

Use and Care Manual

ManualsBrandsMaxxus ManualsHome SpasLifeSauna 2-Person Indoor Hemlock Infrared Sauna with 7 Ultra Low EMF Carbon Infrared Therapy Heaters and Sound System
11121314151617181920
15
Figure 6
D. Understanding the Difference Between the Inside and Outside of
the Rear Panel
You will find the heat emitters on the inside of the REAR PANEL.
Assembly Instructions
1. Choose a good location to assembly the sauna
a. The location must be dry, level, and away from any source of water.
b. The dedicated outlet must be easily accessible.
c. Two adults will be needed to assemble.
d. Wood Cabin Assembly: Floor Panel Front Panel Right Side Panel
Left Side Panel Rear Panel Bench Emitter
Panel Bench Roof Panel Roof Cover
The sauna can be assembled in different sequences, but the above is
recommended.
e. Tools Required: Philips screwdriver and ladder
2. Installing the FLOOR PANEL
A. Place the FLOOR PANEL onto your floor where the sauna is to be
assembled. The front side and back side are the same. (see Figure 7)