Use and Care Manual

19
8. Installing the ROOF PANEL
A. The side of the ROOF PANEL with the ceiling vent will be situated towards
the rear of the sauna. Two adults can carefully lift the ROOF PANEL up and
onto the top of the sauna room. Be careful when setting the ROOF PANEL into
place as the cords and wire harness will need to be fed up to the topside of the
ROOF PANEL. (see Figure 15)
Figure 15
9. Connecting the plugs on the ROOF PANEL
A. Connect the cords according to their respective labels. (see Figure 16)
B. Connect the CTRL connection from the power supply to the CTRL
connection from the control panel. (see Figure 16 & 16a)
Figure 16 Figure 16a
10. Installing the TEMPERATURE SENSOR
A. Enter the sauna and remove the protective covering (tape) from the
TEMPERATURE SENSOR. Situate the TEMPERATURE SENSOR so that it is
vertical and pointing downward. (see Figure 17)