Owner's Manual

FIG-13 Slip cords/wires through corresponding holes FIG-14 Connecting cords/wires connectors

13. Connect all the wires and connectors to the corresponding outlets on the Roof Panel. Please be sure all the plugs are

connected snug and tight. See FIG-14. Next, pull down the cords/wires of the power plugs of the speakers,

temperature sensor, control panel and CD player through the hole near the fan on the Roof Panel.

14. The CD Player will already be mounted in its wood housing box. Connect the antenna to the CD player. Next, feed

the wires up through the roof. Connect the antenna into the rear of the radio and connect the radio harness up o the

roof. See FIG 15.1 Next, mount the wood housing box to the ceiling of the sauna room. FIG 15.2 and 15.3.

Note: CD player may not be available on all model sauna rooms

Step 1 Step 2

FIG 15.1 Screw CD Player into sauna room

FIG 15.2 Installing the Radio Wood Housing FIG 15.3 Screwing in the Radio Wood Housing