Owner's Manual
10 
15. Connect the control panel connectors. See FIG 16 
                                                         FIG 16 Connecting control panel connectors 
16. Make sure all steps are completed correctly.    Plug in the power cord to your wall outlet.    Turn on the sauna at 
the control panel to confirm that the control panel is responding.    If the control panel responds accordingly, then 
proceed  in  putting  the  Roof  Cover  onto  the  Roof  Panel.    Make  sure  to  pull  the  power  cord  through  the 
corresponding hole in the Roof Cover. See FIG 17 
FIG 17 Slip the power cord through Roof Cover                                          FIG-18 Screw down the Roof Cover 
17. Screw down the Roof Cover to the Roof. See FIG-18 
18. Attach the door handle and screw into place.    Screw cup-holder and magazine rack to the interior wall panel. 
(Cup-holder and/or magazine rack are not available on all models.) 
 Installation Completed. 










