Manualshelf

Owner`s manual

ManualsBrandsMay Manufacturing ManualsHome building and DecorIsland spas
891011121314151617
12
Temperature in Fahrenheit or Celsius
To change from either Fahrenheit or Celsius, hold the Pump 1 switch for 5 seconds. The
“Default” is Fahrenheit.
Programming Your Filter Cycle
If your spa is not equipped with a 24-hour circulation system, your filter cycle will run twice a
day for the selected time.
To set your filtration cycle, hold the light key for 5 seconds; a number will show on the display
(0-12). This number is the duration of the filter cycle. 0 is no filtration cycle and 12 is a 24-hour
filter cycle, (not recommended for systems without a circulation pump).
CAUTION: Running large pumps for long periods of time can cause the water temperature
to increase, even without the heater coming on.)
Once the desired duration is selected, pressing the light key will automatically start the filter
cycle. This will determine the time of day the filter cycle will run, i.e., if you set your filter cycle
to run for 2 hours at 3:00 p.m., the filter cycle will run for 2 hours at 3:00 p.m. and 3:00 a.m.
If your spa is equipped with a 24-hour circulation pump, the filter cycle will determine how long
the ozonator will run. Please see instructions for setting filter cycle, above, to set time of
ozonator duration.
Fiberoptic Lighting (option):
The first push of the light key will turn the light and color wheel on. The second push of the light
key will leave the light on, but leave the color wheel stationary. The third push of the light key
will turn off the Fiber optic light system.
Stereo (option):
Your stereo function is operated by the stereo itself. Please see the stereo owner’s manual.
Smart Winter Mode:
Your spa is equipped with a Smart Winter Mode. If at any time the temperature goes below 55˚F,
the system will start the Smart Winter for the next 24 hours. In this mode, the system will start
each pump for 1 minute every hour.
Power Up Detection:
A flashing display on the topside control indicates that power has been interrupted to the spa and
restarted. You must reset the filtration cycle if this has happened.