Owner`s manual

ERROR CODES

32˚:

This code indicates you have a temperature probe failure. Verify that the

water temperature is not 32˚. If water temperature is over 32˚, contact

your dealer for repair.

3 Flashing Dots:

This code indicates that there is a problem with water flow or a heater failure. Check the water

temperature with an accurate thermometer. Verify that the temperature on the topside display and

the thermometer is +/– 1˚ within range of each other. If water temperature is higher than 112˚F,

leave your cover open, shut off the spa, and let cool. Once the water temperature has reached

normal operating procedures, turn power back on to the spa. If water temperature is correct,

remove the circulation pump filter and clean the circulation pump screen. If this did not clear

your error, please contact your dealer for service.

♦♦♦