Owner`s manual

• Turn off the power to your spa.

• Attach your garden hose to the hose bib.

• Place the other end of your garden hose in an area that will accept the water capacity of

your spa. Draining should take about 3 to 4 hours.

CAUTION: The chemical content and temperature of the water will cause damage to

certain vegetation. We do not recommend that you drain your spa onto plants or lawns. If

you choose to do this, please remove your spa cover and allow spa to cool for a minimum

of 24 hours, with you heat adjusted to the minimum setting, before draining.

• Open the hose bib by turning the valve knob counterclockwise to the full stop position.

• Check the garden hose end to see if water is flowing. If water is not flowing, check the

hose for kinks. Also check to see if valve knob is in the full open position.

• When spa is empty, clean and wax as instrcuted in the section titled WAXING AND

CLEANING YOUR SPA SURFACE.

WAXING AND CLEANING YOUR SPA SURFACE:

While your spa is empty, clean and wax it thoroughly with a cleaner/wax to keep your spa

shell looking new. Your Island Spas dealer can recommend a product for you. If there are

small scratches in your shell, use an automotive polishing compound to rub out the scratches.

If your spa has more serious scratches, consult your dealer for assistance.

WINTERIZING YOUR SPA:

NOTE: It is not recommended that you drain your spa completely during freezing

conditions. We recommend that you leave your spa full of water and power on to keep the

tub from freezing. If you decide to drain your spa during freezing conditions, contact your

dealer for help.

WARNING: Damage to your spa caused by freezing is not covered under warranty.

Please contact your local Island Spas dealer to assist you in winterizing your spa.