Owner`s manual

37
SYSTEM RELATED/ MESSAGES
Program memory failure – M022
Call you dealer for service.
The settings have been reset– M021
Call you dealer for service if this message appears on more than one
power-up.
The clock has failed –M020
Call you dealer for service.
Conguration error (Spa will not Start Up)
Call you dealer for service.
The GFCI test failed (System Could Not Test the GFCI) – M036
(North America Only) May indicate an unsafe installation. Call you
dealer for service.
A pump may be stuck on – M034
Water may be overheated.
NOTE: POWER DOWN THE SPA! DO NOT ENTER THE
WATER!
Call you dealer for service.
Hot fault – M035
A pump appears to have been stuck on wirh the spa was last powered
on. Water may be overheated.
NOTE: POWER DOWN THE SPA! DO NOT ENTER THE
WATER!
Call you dealer for service.