Owner`s manual

41
MAINTAINING YOUR SPA
REMOVING, INSTALLING AND CLEANING FILTERS
These are the steps needed to successfully replace your lters. You
should replace your disposable spa lters and clean your non dispos-
able lters every four months.
1) Turn off all power to your spa
and remove the lter lid by lifting it
out towards you.
2) Turn the lter counterclockwise
and remove it from the lter well.
3) Dispose of the used lter.
4) To replace, set screen back into
its place and turn clockwise to fasten.
DO NOT over-tighten.
5) Place the new lter into position
and turn clockwise to fasten. DO NOT
over-tighten.
6) We recommend the use of a quality lter soak product. Please con-
tact your dealer to purchase all your spa care products.
NOTE: Only use Artesian Spas approved lters. Using a Non Ar-
tesian Spa approved lter can cause issues with circulation and
heater, using a non Artesian Spa lter can void warranty cover-
age. You can upgrade your lter to a 75 Sqft. lter. Please see your
Artesian dealer, Part# 06-007-12 (standard) or 06-008-12 (Nature2)
option.
WARNING: Power to your spa must be turned off prior to remov-
ing your lters. The suction at the lter is extremely strong and
can cause injury if there is no lter. NEVER run your spa without
the lters properly installed. Injury to person and damage to the
equipment can occur. Any damage to equipment due to this cir-
cumstance will not be covered under warranty.