User manual

11First Start

Power (Green LED):

Lights up when charger is connected to electricity network

Charging (Yellow LED):

Lights up during battery charging. When FLASHMAN II battery is fully

charged this LED is switched off.

Error (Red LED):

Lights up when charger senses an error or when no battery is placed in the

charger. Possible errors are described below.

Charger errors:

Output voltage is out of operational range (9-12V)

Internal temperature of charger is out of range

Battery is faulty

2.3 Connectors

FLASHMAN II has got connectors on the top and bottom side.

Connectors on the top side

Slots

a) Slot for PCMCIA cards

In this slot the following cards can be inserted:

FLASHMAN II 3G/UMTS card (order no. F-3G) for IP-transmission via 3G/

UMTS

FLASHMAN II WLAN card for IP-transmission via WLAN

PC-Memory-card (for recording)

b) Slot for SD/SDHC card

In this slot any standard SD/SDHC card can be inserted as storage device for

recording.

c) Slot for FLASHMAN II battery

Here the original FLASHMAN II battery can be inserted. This battery enables a