User manual

12 Manual for Flashman II

mobile use of FLASHMAN II for a period of about 5 hours, depending on type of

use.

d) Ethernet connector

The RJ45 Ethernet connector can be used for IP-transmission via LAN and WAN.

e) USB connectors

FLASHMAN II has got two USB ports.

USB A-type port

Here a USB storage device (e.g. USB stick) can be connected. Such a USB

storage device can be used as storage device for recording (instead of SD/SDHC

card or PC-Memory card).

USB mini port

This USB mini port is planned to use FLASHMAN II as a client (e.g as

professional sound card for PC).

Audio connectors on the bottom side

a) Audio inputs

Two balanced XLR inputs (female) which can be switched between line use and

microphone use. 48 Volts phantom power can be activated for condenser

microphones.

b) Audio outputs

Outputs 1 and 2 are unbalanced (!) stereo (!) outputs using a 1/4'' headphone

stereo plug each. At output 2 the volume can be set via the headphone level (see

also Front panel user interface/Functions keys/Audio button).

c) Power Supply connector (DC in)

Special Hirose HR10 port for FLASHMAN II AC/DC power supply. Just use an

original MAYAH FLASHMAN II AC/DC power supply. MAYAH is not liable for

damages caused by none-MAYAH equipment.