User manual

20 Manual for Flashman II

(see also Front panel user interface/Function keys/Recorder button)

Stop recording:

(see also Front panel user interface/Control keys/Stop key)

The displayed time can be

elapsed time; in this case the symbol

is shown above

remaining time; in this case the symbol

is shown above

Note:

It can be switched between elapsed / remaining time in the menu item SYS/

Display.

Note 2:

Depending on situation the time format is

minutes:seconds,deci seconds (<h)

hours:minutes:seconds (>=h)

The progress bar shows at

Playback mode: Percentage of elapsed time to track time

Recording: Percentage of elapsed time to available record time.

Note:

The available recording time depends on:

- size of storage device

- max. files size (4 GB)

- bit rate

Note 2:

Since current storage devices are quite big compared to the size of audio

files, often it seems that the percentage state of the progress does not

change.

d) 3G/UMTS signal strength

Best

Good

Sufficient

Bad

Blinking symbol means "no 3G/UMTS connectivity".

e) SIP registration symbol:

This symbol is displayed when FLASHMAN II has successfully registered at a

SIP registrar. How to configure SIP is described in chapter Codec/Setup/Interface