User manual

50 Manual for Flashman II

current protocol: SIP, RTP

connection time (if not connected 0)

connection quality (best, good, sufficient, bad)

local IP-address

remote IP-addr.: IP- or SIP-address of connection partner

input bit rate in kbps

output bit rate in kbps

jitter in ms

lost packets

These are packets lost during transmission and cannot be recovered.

dropped packets

These are packets received in a wrong sequence order. Since delay buffer is

not big enough these packets cannot be reordered and therefore they're

dropped. This can be improved by setting a higher delay buffer (see Codec/

Setup/Interface/Ethernet)

b) 3G/UMTS

current protocol: SIP, RTP

connection type: 3G (UMTS, HSDPA, HSUPA), GSM ( GSM, GPRS, EDGE)

NOTE:

How detailed the connection type is displayed depends on service provider