User manual

73How to use for

If feature 'recording during transmission' is often used a special mixer user

profile can be saved.

b) Establish connection

Establish connection by pressing the Connect button

c) Start Recording

After transmission is established the following steps must be done:

Select the storage media at menu item Rec/Setup/Storage (if multiple storage

media are available)

Start recording by pressing the Recorder button.

Note:

During transmission just quality 'linear 16 bit stereo' can be used.

d) Typical Applications

Audio logging of received audio

3 point interview recording (remote studio, reporter, guest)

4.2 Playback during Transmission

Following steps must be done:

a) Set Mixer

To guarantee the right level ratio between live audio and playback audio the

appropriate mixer settings should be done at menu item Monitor/Mixer at item

'send' if previously not configured.

For instance:

If just a formerly recorded file should be transmitted just the levels 'plyL' and

'plyR' should be in a different position than 0% (left position).