User manual

Individual Parameters
38 © MAYAH Communication GmbH
• Select “on” or “off” and then press the key;
• Repeat this procedure for each parameter which needs to be changed.
• End the setup procedure by pressing the key (twice if necessary).
(b) Via the remote control software:
1) Activating Dial protection
• Select SETTINGS OTHERS. The following dialog box appears:
Figure 35: The OTHER SETTINGS Dialog Box
• Select the appropriate parameter setting under “Dial in protection” (“On” or “Off”).
• In order to activate the new setting, click the “OK” button.
2) Setting up ISDN service protection
• Select EXPERT ISDN SERVICES. The following dialog box appears:
Figure 36: The ISDN SERVICES Dialog Box
• Click the check boxes which need to be changed.
means “ISDN service identification disabled”.
means “ISDN service identification enabled”.
• In order to activate your new settings, click the “OK” button.