User manual

Individual Parameters
42 © MAYAH Communication GmbH
(a) Via the remote control software:
• Select SETTINGS AUDIO in the remote control software. The following dialog window
opens:
Figure 43: The AUDIO SETTINGS dialog window
• Set the desired level with the mouse under “Input Clipping” or “Output Clipping”.
• To make the new level effective, click on “OK”.
5.1.12. Set sources for the input channels
Here you can choose the input source for the 4 channels. Also the Directors Channel can
be set to appropireate input.
This setting is only possible via the front panel, and not via the remote software:
(a) Via the front panel:
• Select the SETUP option in the Start mask (see Figure 4). The Setup mask appears.
• Select Input and press . The Inputmask appears.
Figure 44: The Input mask
• Select the appropriate item with the and keys and press .
• Select the desired parameter with the and keys and press .
• Choose at “Director Channel” the source, which input audio should be heard, but not
broadcasted.
• To end press the key.