User manual

Table of Contents

Centauri user manual revision level 01 /2007

5.1.13. Set Microphone Settings

Here you can adjust different settings for the microphone channels on the front side.

This setting is only possible via the front panel, and not via the remote software:

(a) Via the front panel:

• Select the SETUP option in the Start mask (see Figure 4). The Setup mask appears.

• Select Microphone Settings and press . The Microphone Settings

mask appears.

Figure 45: The Microphone Settings mask

• Select the appropriate item with the and keys and press .

• Select the desired parameters with the and keys and press .

• To end press the key.

5.1.14. Line In Settings

Here you can adjust different settings for the line in channels on the front side.

This setting is only possible via the front panel, and not via the remote software:

(b) Via the front panel:

• Select the SETUP option in the Start mask (see Figure 4). The Setup mask appears.

• Select Line IN and press . The Line In mask appears.

Figure 46: The Line In mask

• Select the appropriate item with the and keys and press .

• Select the desired parameters with the and keys and press .

• To end press the key.