User manual

Table of Contents

Centauri user manual revision level 01 /2007

5.1.16. Line Out Settings

Here you can adjust different settings for the line out channels on the rear side.

This setting is only possible via the front panel, and not via the remote software:

(d) Via the front panel:

• Select the SETUP option in the Start mask (see Figure 4). The Setup mask appears.

• Select Line Out and press . The Line Out mask appears.

Figure 48: The Line Out mask, the Line Out Mode mask

• Select the appropriate item with the and keys and press .

• Select the desired parameters with the and keys and press .

• To end press the key.

5.1.17. Set Mute

Here you can adjust wether the different channels should react on mute or not and which

function the mute-buttom should have.

This setting is only possible via the front panel, and not via the remote software:

(e) Via the front panel:

• Select the SETUP option in the Start mask (see Figure 4). The Setup mask appears.

• Select Mute and press . The Mute mask appears.

Figure 49: The Mute mask

• Select the appropriate channel with the and keys and press .

• Select the desired parameters with the and keys and press .

• To end press the key.