User manual

Remote Control Software Superuser Password
80 © MAYAH Communication GmbH
9 Technical Data
Device Identification Number
Each MERK II has its own identification number.
In order to display your MERK II’s identification number, proceed as follows:
• Select the SETUP option in the Start mask (see Figure 4) SETUP and press .
• Select IDENTIFICATION and press .
The identification number now appears on the display.
• To close the mask again, press .
18 dBu
+ 2 x Line
In
/ Line Out
XLR
on front
2 x 25 kOhm on rear side