Instructions / Assembly

How to Plant Mayberry Ryegrass
Ryegrass is often used in northern climates due to its ability to tolerate
cool temperatures, and is typically planted when other, more
permanent grasses have died out for the year. Unlike other types of
grass which often go dormant at the first frost, ryegrass can stay green
and lush during the winter months. Properly and carefully planning your
planting area, preparing your soil, and planting the ryegrass seeds can
help you create a great crop of ryegrass.
In southern climates ryegrass is typically used to overseed permanent
lawns in the fall. Ryegrass is also an inexpensive option for short-term
erosion control.
1 Preparing Your Planting Area
1 Choose the right time of year.
It’s crucial that you plant your ryegrass during the correct
season so that it germinates properly. The air temperature
should reach between 60 and 75 degrees Fahrenheit (16 to
24 degrees Celsius) during the day. It’s best to plant rye seed
when the temperatures reach that point but may begin to fall
in a few weeks (planting rye seed before it starts getting
hotter can cause the rye to die).
2 Choose the type of rye seed.
Rye seed comes in two versions – annual and perennial. The
annual seed does not germinate as well as the perennial,
which means you’ll need to use more of the annual variety to
get the same lush look you could achieve with the perennial.
You also have the option of using sod, which is pre-grown
patches of rye that you purchase from a nursery and then lay
over your prepared planting area.
3 Fill in your soil as needed.
Whether you are seeding or sodding ryegrass, you’ll need to
fill in the existing soil so that it reaches the correct depth for
your ryegrass - about 4 to 6 inches (9 to 12 cm). You can use
topsoil to fill in low areas, but the composition should have
less than 20% clay, and it should not contain any herbicides.
4 Add fertilizer to the soil.
This will give the soil the nutrients necessary for your
ryegrass to grow well. Phosphorous and potassium fertilizer
are your best options for use with ryegrass.
2 Seeding Ryegrass
1 Till the soil for new growth.
If you’re planting rye seed on new soil, it needs to be tilled.
This allows oxygen to get into the soil. It also breaks up
clumps of soil, allowing the rye seed to germinate. Evenly till
the soil to ensure even growth of your rye seed.
2 Mow the existing lawn if necessary.
This is crucial if you’re growing ryegrass in an area that is a
permanent lawn - that has other grasses or plant growth
during other times of the year. Mowing the existing lawn as
short as possible will give the rye seed more room to take to
the ground.
3 Use more annual seed.
If you’re using the annual variety of ryegrass seed, you’ll need
to spread more than you would with the perennial variety.
You generally need 15 to 20 lbs (7 to 9 kgs) per 1000 square
feet (9.5 square km) when you’re using annual seed.
Perennial seed should be spread at 10 lbs (5 kgs) per 1000
square feet.
These amounts apply equally to overseeding an existing lawn
and seeding new soil.
4 Divide the seed in half.
You should divide the amount of seed that you need to use in
half. Spread one half of it in one direction, and then spread
the second half of the seed perpendicular to your first
planting direction. This will help ensure an even spread of
your seed.
Depending on the size of your lawn, you may want to use
either a push spreader or a hand spreader to spread the rye
seed. Hand spreaders are typically used for small lawns that
have large amounts of detail, while push spreaders may be
best for larger lawns or new soil with larger open areas.
5 Rake the seed into the soil.
Using a metal rake, rake the seed into the soil to ensure most
of it gets into the soil (rather than lying on top). Rake gently -
you don't want to move the seed around too much, and you
don't want to damage the soil.
If you're overseeding an existing lawn, it might be hard to
rake the seed into the soil. If you can't rake an existing lawn,
that's fine. The existing growth - even if it's short - should
ensure the rye seed isn't disturbed.
6 Water the seeded area immediately.
Once you've spread the seed, water the seeded area until it's
moist. This will soften up the soil and make it easier for the
rye seed to take root. It will also help the rye seed sink into
the soil.
3 Caring for Your Ryegrass
1 Water your lawn frequently.
Until the ryegrass takes root – about three days for sodded
ryegrass and two weeks for seeded ryegrass – water your
lawn two to three times a week. Your grass should be moist
but not saturated. When puddles begin to appear after you
water, you can cease watering regularly and proceed only as
needed.
2 Apply a high nitrogen fertilizer.
Applying a fertilizer high in nitrogen helps the ryegrass grow.
It’s also great if you’ve overseeded an existing lawn and will
be using it later to grow vegetables.
3 Mow your grass frequently.
Ryegrass grows very quickly, which means you’ll need to
mow your lawn a few times a week. You should set your
mower blade to a high setting.
Tips
• Ryegrass is not perennial, and therefore must be planted each year.
• Ryegrass will reach the end of its growing season around the end of
May. At this point, avoid watering the grass for a few days. This will
allow the ryegrass to become dormant, and will aid in bringing about
the permanent, summer grass.
• Like other types of grass, you must mow the ryegrass at least once
a week during its growing season. Mowing the grass using the
tallest setting on the mower provides the best results with this type
of grass.
• Plant ryegrass near your legume garden to keep pests away from
your legumes.
Warnings
• As ryegrass often grows in thin clusters, mowing it too short can
make your lawn look uneven. Experiment with different lawn settings
to find the look you like best.
• Ryegrass is best in areas that don’t need to be weeded often, or
where the existing plant life has a short growing season. Avoid
planting it in flower beds.