Instructions / Assembly

Mayberry Sun and Shade Mix
• Provides the most versatile lawn in sunny to moderately shady areas
• Produces a thick, fine bladed, dark blue green lawn
• Very good drought tolerance
• Good disease and insect resistance
• Contains improved seed varieties that thrive in sun and shade
• Seed mix changes for different regions of the country, providing a grass seed specifically formulated for the different climatic
zones
Planting & Growing Instructions
New Seeding
Prepare the soil by tilling to a depth of 4–6 inches. Conduct a soil test to be sure your soil has the proper nutrients it needs for a
healthy lawn. Apply fertilizer and soil amendments, such as lime or gypsum, at the recommended rates. If you are unable to
conduct a soil test, apply a complete lawn fertilizer according to the recommended rates on the packages. Work fertilizer or soil
amendments evenly into the soil, then rake the soil surface smooth to give the seed an ideal bed in which to establish healthy
roots. Sow the grass seed by evenly spreading according to the recommended seeding rates. Rake, harrow or otherwise work the
seed into the soil ⅛" deep. Keep the area well-watered until the seeds germinate and the seedlings have grown sufficiently to
establish a lawn, then water as needed.
Overseeding or Reseeding
Before overseeding, it is important to prepare the soil. Conduct a soil test to be sure your lawn has the proper balance of nutrients.
Fertilize and add soil amendments if needed. Mow or clip the existing grass as closely as possible. Remove clippings and rake,
harrow lightly or aerate the soil where there is existing lawn. This will allow the new seed to make contact with the soil. Sow the
seed and gently rake to cover. Keep the lawn moist until seedlings are established, then water as needed.
Undesirable Lawns
Rid your lawn of undesirable grasses following the steps below so that you can establish a desirable lawn:
• During any growing season, spray the established undesirable turf with a nonselective herbicide labeled for lawn use. Follow the
directions on the label.
• After the lawn turns brown, continue with your seeding program as outlined above. Be sure to start with a soil test or a soil
amendment, such as fertilizer.
Improving Bare Spots
Mow your lawn closely, then remove leaves, dead grass, etc. Rake, harrow lightly or aerate the bare spots to prepare the seedbed.
Conduct a soil test to be sure the soil has the proper balance of nutrients. Fertilize and add soil amendments if needed.