User's Manual

11
Frequency Up/Down” button”
- Press “MEM” button longer than 2 seconds
- The LCD will show the empty memory channel location
- Select the memory location where you wish to store the selected
frequency by pressing "▲ or ▼" buttons till the Memory Channel
Indicator shows that location.
- Press the “SET” button.
Note : 1. If the “MO/SET” key will not be pressed over 4 seconds,
current frequency will be stored automatically.
2. When the selected frequency is stored, the being used mode
and step are also stored automatically.
2) Memory Recall
To access the memory recall,
- Press “MEM” button simply
- Select the memory location where you wish to find the stored
frequency by pressing "▲ or ▼" buttons till the Memory Channel
Indicator shows that location.
- To Deactivate : Press “MEM” button simply
Note : If you want to use the stored frequency in normal mode, press
“MEM” button longer than 2 seconds.
3) Memory Scan
To access the memory scan
- Enter the Memory Recall mode by pressing “MEM” button
- Pressing "▲ or ▼" buttons longer than 2 seconds
- The empty memory channels are skipped during scanning processing.
- To stop scanning, press any button.
4) Deletion of stored frequency
To access the deletion of memory
- To enter memory mode
- Select the memory channel which you want to delete
- Press “MO/SET” button longer than 2 seconds
- “ErASER” will appear on the LCD
- Press the “MO/SET” button one more time. With beep, the stored
frequency in the memory channel will be erased.
5) Delete all stored frequency in the memory channel
To access it :
- Turn the power off
- Press and hold “SET” button
- Turn the power on.
6. CUR.(Cursor) button