User's Manual

6
● Side and Back Panel Features
1. MO/SET (Monitor)
1) MO(Monitor)
Press the "MO(Monitor)" button shortly in the receiving mode to open
the squelch control. This is useful when a weak signal is to be
monitored.
Re-Activate : Press the MO button one more time.
2) SET
To fix each selection. Press this button.
2. (Lamp)
Press the " " button, the lamp will stay on for four seconds, after that It
will turn off automatically. If you press another button on the front cabinet
when the lamp is on, the lamp will stay on for four seconds from that time.
If you press the " " button for more than one second, the beep will be
Come and the lamp will stay on until you press the " " button once
again.
3. Belt Clip
Allows for ease of carrying while attached to user’s belt.
4. DC Jack
Allows for using external DC Power supply.