User's Manual

7
● Front Panel Features
1. ▲(Channel up) button
Press the "▲" button to move to a higher frequency than is currently
shown on the LCD.
To access Up scanning process, press the "▲” button over two seconds.
In the event that during the scanning processing, the radio stop for
3 seconds at a receiving frequency and re-starting the scanning
processing unless you press any buttons.
- If you want to stop scanning process, simply press any button
- The scanning processing is available per band.
2. ▼(Channel Down) button
Press the "▼" button to move to a lower frequency than is currently
shown on the LCD.
To access Down scanning process, press the " ▼” button over two
seconds. In the event that during the scanning processing, the radio stop
for 3 seconds at a receiving frequency and re-starting the scanning
processing unless you press any buttons.
- If you want to stop scanning process, simply press any button
- The scanning processing is available per band.
3. SEL button
1) Select the mode
To select the wanted mode, pressing “SEL” button. Each mode will be
accessed with following turn.