Use and Care Manual

4
4
A
A
USE AND MAINTENANCE
- Use on level surfaces only
- Because this product needs assembly, it is prone to working itself
loose from time to time depending on the use. Please take the time to
check that all connections are still tight and working properly for safety.
- Only clean using a damp cloth and mild detergent, do not use bleach
or abrasive cleaners.
PART LIST
1 - Futon Assembly x1
Futon Sofa Bed with Cup Holders
Assembly Instructions
1
Select and lay flat 1
assembly and turn
over upside down.
Select 4 x2 and
insert leg post into
A
back hole in futon.
Turn clockwise
to hand tighten.
3
A
2 - Arm Rest x2
3 - Front Leg x2
4 - Rear Leg x2
HARDWARE
3
A
2
C
Select 3, A Bolts x4,
3
A
B Washer x 4. Insert
A Bolt into B Washer and
through hole in 3 then
mount 3 to part 1
Assembly. Ensure
the leg orients to point
outward for proper support.
A - Bolt x8
3
2
A
B - Washer x8
2
A
C - Allen Wrench x1
Select 2, and insert arm pads into position.
Pull down center console with
cup holders.
Note:
To sleep - pull backrest
forward until it clicks to release
and then push backward to lay flat.
To Recline:
Lay flat to sleep, then pull up into
desired recline position.
Congratulations! Setup of your new
Naomi Home Futon is Complete!
Made in Vietnam
B