Aberdeen Series Main Desk - Height Adjustable Model No. ABDHA7242 / 6642 ® ASSEMBLY INSTRUCTIONS CALL 1-800-822-8037 FOR ASSISTANCE P/N ABDHA REV 1 11/17 www.mayline.
PARTS LIST Name Qty. Spare Part Name Qty ABDHA HB A Qty.
PARTS LIST Name Part L Qty. Name 1 N ABDHA Part Qty.
PARTS LIST Z548/Z549 HB S HB 2 W 1 REALS016 2 1 REALS440 M6*10 Ø4*16 HB T X 2 REALS438 1 Control box Z Bracket HB U 2 Y 1 REALS442 Controller Ø4x14mm V 1 1 RD HA RE WA 1 Z548HB Power cord NOTE: ①. 1 Top and 2 Modesty Panel and 2 Wire Management Tray with Hardware packed in one carton - ABDHA7242/ABDHA6642. ②. 2 Legs packed in one carton ③.
IMPORTANT! Review ALL instructions before beginning assembly. These instructions are provided to avoid problems that may occur from improper assembly or installation. Mayline and/or its distributor are not responsible for failure resulting from improper assembly or installation of this product. Moreover, all warranties are void for failure to follow these assembly instructions. 1 install the Levelers (P) into the Legs (R and Q).
2 Insert Cams (A) into Fixed Modesty Panel (O). Install Cam Posts (C) into threaded inserts in Top of Legs (R and Q). Attach Fixed Modesty Panel (O) to Legs (R and Q) by turning Cams (A). Attach Stickers (B) over Cams (A). NOTE: Before assembly the top to metal frame,adjust the SAME HEIGHT of both wood legs O R D C A Q 3 B Insert Wood Dowels (D) into the Adjustable Modesty Panel (M), Insert Cams (A) into Adjustable Modesty Panel (M). Install Cam Posts (C) into the Top (L).
4 Install the Bracket (T) to the Control Box (X) by Screws (S), Install the Control Box (X) to the Top (L) by Screw (W); Install the Bracket (J) to the Adjustable Modesty Panel (M) and the Top (L) by Screw (E). S E W X T J 5 Put the Top (L) on the Legs (R and Q).
6 Install the Top (L) to the Legs (R and Q) by Screw (H); Put Memory Controller (Y) on desired location on front edge of top, and fasten with Screws (U). H F N G Y U Y 7 K Uninstall the Frame Mounting Screws, Qty 2, with Wrench (K). Install Wire Management Tray (N) to Frame using Screws (G) and Wrench (K). Re-install Frame Screws thru Wire Management Tray.
8 Put the Grommets (I) to the Top (L); Connect power for Control Box (X) using the Power Cord (V) and connect Controller (Y) into the Control Box (V); Plug Power Cord (V) into outlet and proceed with Controller Initialization.
Make sure no obstacles are in the desk's path. Make sure the desktop is not touching any walls. Make sure all cords are appropriate length to accommodate the change in height. IMPORTANT: You must INITIALIZE the desk prior to first use. Controller Initialization- Press and hold the Down button on the controller until the desk reaches its lowest height, slightly raises, and stops. Release the down button, your desk is now ready for use.
