User Manual

NOMAD - LK4 -2
O
PERATING
I
NSTRUCTIONS
P
AGE
7 of
7
Note that switch SW1 position 6 (leftmost) is reserved for factory test mode
and should be in the 0 (down) position for normal use.
4.4 ANTENNA
Screw the antenna directly into the link unit as per figure 1.
Never attempt to use a cable to extend the antenna or mount it remotely
from the link unit.
Never connect anything over than the supplied antenna to the antenna port.
5. MAINTAINENC E
The link unit is designed to give maintenance free service.