User's Manual

NOMAD
™
- W4-2 SCALES
O
PERATING
I
NSTRUCTIONS
P
AGE
5 of
13
28-Oct-2001
2.2.1 Clock In
Place the operators picking basket(s) on the scales. Enter ‘1’. The
controller will prompt for the operators number. After entering the operators
number the controller will monitor the platform for a stable weight. The
stable weight will be entered as that operators tare value. The time and
operator number will be transmitted to the NOMAD system as a clock on
message.
If the operator is already known to the controller their previous tare value will
be overwritten.
2.2.2 Clock Out
Enter ‘2’. The controller will prompt for the operators number. Enter the
operators number to clock out that operator.
If all operators are to be clocked out enter a ‘0’ instead of the operator
number.
Once clocked out an operator may be clocked in again using function 1.
The NOMAD system will always use the earliest clock in time and the latest
clock out time.
2.2.3 Coffee
Enter ‘3’. The controller will prompt for the operators number. Enter the
operators number to apply a fixed length coffee break for that operator or a
‘0’ to apply it to all operators.
The break duration and job number are defined in NOMAD Central system
setup. Two entries will actually be made by this command - a break entry
timed at the current time and a “picking” entry timed at the current time plus
the break duration.
2.2.4 Lunch
Enter ‘4’. The controller will prompt for the operators number. Enter the
operators number to apply a fixed length lunch break for that operator or a
‘0’ to apply it to all operators.