Use and Care Manual

METAL FIRE PIT

Thanks for choosing Abble Inc products. We'd love to hear your thoughts, and so would other customers. If you are

satisfied with our products and service, please let us know. If you have questions or feedback, we're here to help!

cs@abbleinc.com.

(We will reply you within 24 business hours)

www.abblestore.com

Screen handle

Mesh screen

Support ring

Bowl

Upper ring

Bottom ring

Leg

Poker

M6 x 15 mm Bolt

M6 x 30 mm Bolt

Flat washer M6

Nut M6

PAGE 1
METAL FIRE PIT Screen handle 1 Mesh screen 1 Support ring 1 Bowl 1 Upper ring 1 Bottom ring 1 Leg 4 Poker 1 M6 x 15 mm Bolt 12 M6 x 30 mm Bolt 4 Flat washer M6 20 Nut M6 9 Thanks for choosing Abble Inc products. We'd love to hear your thoughts, and so would other customers. If you are satisfied with our products and service, please let us know. If you have questions or feedback, we're here to help! cs@abbleinc.com. (We will reply you within 24 business hours) www.abblestore.
PAGE 2
Step 1: Connect Screen Handle (A) and Mesh Screen (B) by Step 2: Attach Leg (G) to Bottom Ring (F) by using Bolt (BB), Step 3: Turn over the bowl (D) and contact it with Upper Ring (E) Step 4: Put Mesh Screen (B) on the bowl. using Nut M6 (DD) and tighten with wrench. by using Bolt (AA), Flat washer (CC), Nut (DD) and tighten with wrench. Flat (CC), and Nut (DD).Do not tighten them fully. Attach Leg (G) to Upper Ring (E) by using Bolt (AA), Flat Washer (CC). Tighten all bolts with screwdriver.