Use and Care Manual

Step 1: Connect Screen Handle (A) and Mesh Screen (B) by
using Nut M6 (DD) and tighten with wrench.
Step 2: Attach Leg (G) to Bottom Ring (F) by using Bolt (BB),
Flat (CC), and Nut (DD).Do not tighten them fully.
Attach Leg (G) to Upper Ring (E) by using Bolt (AA),
Flat Washer (CC). Tighten all bolts with screwdriver.
Step 3: Turn over the bowl (D) and contact it with Upper Ring (E)
by using Bolt (AA), Flat washer (CC), Nut (DD) and tighten
with wrench.
Step 4: Put Mesh Screen (B) on the bowl.