User's Manual

ManualsBrandsMaysly jslbtech ManualsElectronicsVideo Door Phone

Table Of Contents

2.2.6 Setting-Senior setting

On setting menu, touch the option “Senior setting” to enter. On the senior setting menu, user can format

SD card, restore factory default settings, update software and restart system.

Senior setting

Formatting SD disk

Factory Settings

Software update

Restart system

[Formatting SD disk]: Touch “Ok” to confirm whether to format the SD card in this field. When using

the TF card for the first time, please format it. When formatting the TF card on the monitor, it will

automatically create five folds named “Ring”, “DOORBELL”, “Digital Frame”, “Message Import” and

“BgMusic”. “RING” is used to store Mp3 ringtones, “DOORBELL” is used to store snapshot files and

video files, “Digital Frame” is used to store E-Photos, “Message Import” is used to store custom

message prompts and only supports Mp3 format, “BgMusic” is used to store the background musics

of E-Photos.

Notice: All the recordings and photographs are be stored in the TF card of the monitor. If the TF

card capacity is less than 64GB, the file system format of the TF card must be Fat32. If the TF

capacity is greater than or equal to 64GB, the file system format must be exFat. And it is

recommended to use a TF card with a writing speed greater than Class 10 on the monitor.

[Factory Settings]: Touch “Ok” to select whether to restore all the parameters to be the factory

default values.

[Software update]: User can upgrade the software through a TF card. First copy the updated firmware

named “update.ius” to the TF card, then insert the TF card into the monitor, the TF card will be

automatically detected. Tap the “Ok” option on the right of “Software update”, some tips “Software

update” appear, press “Ok” to update the firmware, press “Cancel” to cancel.

Note:

1. If the TF card capacity is less than 64GB, please make sure the TF card system format is

fat32. If the TF capacity is greater than or equal to 64GB, please make sure the file system

format is exFat.

2. During updating the monitor, please don’t remove the TF card or power off the monitor.

3. The prompt “Updating” will always be displayed on the screen, and after the update is

completed, “Success” will be displayed. The monitor will automatically restart.

[Restart system]: Choose whether to restart the system.

2.2.7 Setting-Information

On setting menu, touch the option “Information” to enter. On the information menu, user can preview

the system software version, release date, SD remain space and UUID. If the weather function is

turned on and the monitor has been successfully connected to the Internet, users can also preview the

weather-related information on this menu interface.

2.2.5 Photo frame

This field is for E-Photo, when formatting a TF card on the monitor, it will automatically create a folder

named “Digital Frame”. User can copy jpg pictures from PC to this folder.

Notice that those jpg picture files can be named up to 30 characters, and can contain numbers

or letters. Press “ ” to exit.

[Net pairing Mode]: Use this field to configure the device network. When the monitor will connect to

the Wi-Fi router via a wireless network, user can select "EZ Mode" or "AP Mode" to set. When the

monitor is connected to the Wi-Fi router through a network cable, uaer can select "cable" to set. Press

“ ” or “ ” to select the net pairing mode, press “ ”, the following window will pop up, press “Ok” to

confirm, the monitor will auto-reboot. After the monitor restarts,

it will enters the corresponding net paring mode.

[Cloud services]: Device networking status display, including

“Unconnected” and “Connected”. “Unconnected” means the

monitor is not connected to the Tuya cloud server. “Connected” means that the monitor is connected

to the Tuya cloud server through the “TuyaSmart” application.

[IP Address]: Preview the monitor IP address in this field. When the monitor is connected to the Wi-Fi

router via a wireless or a wired network, the IP address can only be displayed when the monitor is

successfully connected to the Tuya cloud server, otherwise it will be blank.

[MAC]: Preview the monitor mac address in this field.

Restart system

Cancel

[Photo frame]: Enable or disable the photo frame when exiting the main menu. “ ” means enable,

“ ” means deactivate.

[Digital photo time]: Press “ ” or “ ” to set the time for switching photos, the option can be set from

3 seconds to 30 seconds.

[Background music]: Whether to enable the music playback function when the monitor is into photo

frame mode. The music is the mp3 rings stored in the “BgMusic” folder of the TF card. “ ” means

enable, “ ” means deactivate.

[Background volume]: Press “ ” or “ ” to set the volume of the background music, option can be

set from 0 to 10.

Note: When the screen saver clock and photo frame function are enabled at the same time, the

priority of the photo frame is higher than the screen saver clock.

Photo frame

Digital photo time

Background music

Background volume

6 Sec