User's Manual

21
22
3. Playback
On main menu, tap the “Recording” option to enter, including “Call record”, “Message record”,
“Motion record” and “Alarm record”. Press “ ” to exit.
Call record Message record
Motion record Alarm record
All call record videos and call snapshots will be displayed on the call record list. Tap any one to play.
[Read]: It indicates that the record list has been played.
[Not read]: It indicates that the record list hasn’t been played yet.
[ ]: In the file list, press “ ” to page up.
[ ]: In the file list, press “ ” to page down.
[ ]: In the file list, press “ ” to exit.
[Call record]: All call record videos and call snapshots can be previewed on the “Call record” file.
[Message record]: All message record videos can be previewed on the “Message record” file.
[Motion record]: All record videos and snapshots triggered by motion detection alarm can be
previewed on the “Motion record” file.
[Alarm record]: All record videos and snapshots triggered by I/O alarms can be previewed on the
“Alarm record” file.
Note: If the capacity of the TF card is less than 500MB or the file number reaches 2048, the
recorded file will start to be overwritten.
Please refer to the following methods to play videos or photos. For example, how to play call record
videos and call snapshots.
On “Recording” menu, tap the “Call record” option to enter the call record list.
In the file list, press and hold any list until a window pops up(as shown below). Select “ON” to playback
the current file, select “Delete” to delete the current file, select “All delete” to delete all the call record
and snapshot files, select “OFF” to cancel.
Call record (14-1/2)
20210907115640_0002_DOOR2.mov
20210907115637_0001_DOOR2.mov
20210907115635_0001_DOOR2.jpg
20210907115633_0001_DOOR2.jpg
20210907115632_0001_DOOR2.jpg
20210907115631_0001_DOOR2.jpg
20210907115629_0001_DOOR2.jpg
20210907115627_0009_DOOR2.mov
20210907115618_0006_DOOR2.mov
20210907115610_0003_DOOR2.mov
Not read
Not read
Not read
Not read
Not read
Read
Read
Not read
Not read
Not read
Call record (14-1/2)
20210907115640_0002_DOOR2.mov
20210907115637_0001_DOOR2.mov
20210907115635_0001_DOOR2.jpg
20210907115633_0001_DOOR2.jpg
20210907115632_0001_DOOR2.jpg
20210907115631_0001_DOOR2.jpg
20210907115629_0001_DOOR2.jpg
20210907115627_0009_DOOR2.mov
20210907115618_0006_DOOR2.mov
20210907115610_0003_DOOR2.mov
Not read
Not read
Not read
Not read
Not read
Read
Read
Not read
Not read
Not read
ON
Delete
All delete
OFF
Information
Software version
Release date
SD remain space
UUID
0.0.0.1
2021-11-29
7.3G/7.3G
*8105f097
2.3 Scene mode
Not at home
At home Dormant
[At home]: When the user is at home, the monitor can be set to “at home” mode. If a visitor calls, both
the outdoor bell and the indoor monitor will ring.
[Not at home]: If the user enables the message function of the indoor monitor, the monitor must be
set to “not at home” mode, and the record mode of the both outdoor bells must be set to “video”.
[Dormant]: This is do not disturb mode. If the monitor is set to "Dormant", when a visitor calls, both the
outdoor bell and the monitor will remain silent.
Information
Software version
Release date
SD remain space
UUID
0.0.0.1
2021-11-29
7.3G/7.3G
*8105f097
City
Weather
Temperature
Humidity
Pressure
Zhongshan
Sunny
O
25 C
46%
1014 mmHg
2.4 Lock
Monitoring Transfer Recording
Setting At home Lock
2021-11-16 12:24
[ ]: Lock, touch this item to release the door
lock connected to the indoor monitor.