User's Manual

7
8
1.6 Description On Indoor Unit
Visitor Call
Standby mode
The Visitor press
the call button on
outdoor camera 1
A continuous ring
tone is heard
inside and outside
The visitor’s image
automatically displayed on
the screen.
Touch the “ ”
icon on the screen.
Stop ringing
Start conversation
with outdoor camera.
The conversation
duration is 120s
at a time
Touch the “ ”
icon on the screen.
The Visitor press
the call button on
outdoor camera 2
NOTICE:
If both call button on two outdoor camera are pressed at approximate
to the same time, the preference will be given to the outdoor camera
which call button was pressed first, unless the call button is pressed
again after the indoor monitor go into standby mode, please be aware
of that there is no indication on second outdoor camera.
NOTICE:
The indoor unit will automatically go into standby mode if you are not
at home or have not reached the indoor unit in 60s.
End
release the door lock
connected to the doorbell.
1.7 Operation Introduction on Indoor Monitor
Touch the “ ” icon
on the screen.
Both the visitor's voice and image will not be switched off within 20s of time span when the
unlock button is pressed, this individualized function allow you to make sure whether the
visitor already come in.
When the indoor monitor detects the TF card, if the menu “Setting->Door setting->Door1/Door2
->Record mode” is set to “Video”, it will start recording from the call. If the menu “Setting->
Door setting->Door1/Door2->Record mode” is set to “Snapshot”, when the visitor presses the
call button on the outdoor camera, the first photo will be taken.
In the monitoring mode, you can press the icon “ ” to conversation and press the icon
“ ” to unlock and unlock the door lock connected to the current doorbell.
2
5
4
3
1
Insert a TF card to store video records, audio records and photographs,
supports up to 256GB. All the recordings and photographs are be stored in
the TF card of the monitor. If the TF card capacity is less than 64GB, the
file system format of the TF card must be Fat32. If the TF capacity is
greater than or equal to 64GB, the file system format must be exFat. And it
is recommended to use a TF card with a writing speed greater than
Class 10 on the device.
Speaker
TFT display &
Touch Screen
1. View visitor’s image displayed on the TFT screen.
2. Touch screen function.
Microphone
Sound from outdoor camera.
Transmit the voice to outdoor camera.
Name
Descriptions
2
3
4
TF card slot
5
1
LED indicator
1. Red -- Standby mode.
2. Green -- Monitoring Door 1.
3. Yellow -- Monitoring Camera 1.
4. Blue -- Monitoring Door 2.
5. Purple pink -- Monitoring Camera 2.