User's Manual

9
10
14
Outdoor camera calls indoor
monitor and conversation
is underway.
Press this icon to
activate the function
of call transfer to
other extension.
A continuous ring
tone is heard
NOTICE:
When you are transferring a call to other extension, the original
conversation indoor unit will return to standby mode, and the
indoor unit which the call is being transferred will also sound a
continuous ring tone and the video image will appear on its
screen.
Press the talk button
on any of indoor units
At least 2 indoor units is required. This IP indoor monitor must be the master monitor.
Call Transfer To Other Extension
Internal Communication Among Indoor Monitors
Internal communication function requires at least two indoor monitors and one outdoor
doorbell to be connected.
The Electric lock
can be opened.
End the call and return
to standby mode.
Talking with
the visitor.
Start conversation between the both
indoor monitors.
Press the talk button on any of slave
indoor monitors.
End
A. This IP indoor monitor supports the directional call function, if the connected indoor
extension does not support the directional call function, the user can set the indoor
extension “Mode” menu to “Slave”.
Standby Mode
NOTICE：
In internal communication mode, if a visitor press the
call button on either of outdoor unit, the internal
communication mode will be switched off. The just
visitor’s image will appear on its screen and continuous
ringing will be heard, you can press the talk button to
reactivate conversation with the visitor.
Touch the screen anywhere to
bring up the main menu.
Touch the “ ” icon on the master
to call all the slave monitors.
Press the “Hang up” button on the slave or
Press “ ” on the master.
A continuous
ring tone is
heard on the
slave 1.
Standby Mode
Press the icon “ ”
Call Outdoor
NOTICE:
Close LCD
Each monitoring time is 60S
If the indoor unit is underway in monitoring mode, during this time a visitor press the call button on
either of outdoor unit, the monitoring mode will be switched off, the just visitor’s image will appear
on its screen and continuous ringing will be heard. If you are using the indoor unit with hands-free,
you can press the talk button to reactivate conversation with the visitor.
If you are using only one outdoor camera in monitoring mode, you can also end the monitoring
mode by pressing the monitoring button again(Must be Close CAM1; DOOR2; CAM2 in the menu
option).
Monitoring On Indoor Monitor
Press the unlock icon, the
electric lock connected to
the current doorbell will be
opened.
Press the icon “ ”
to end the call.
If you use two indoor units, you can also simultaneously in other indoor unit starts monitoring
mode, the same images are displayed on the screen of the different indoor unit.
Touch the screen anywhere to access the main menu, press “ ”
Please be aware of Connection of 2 outdoor cameras and 2 CCTV cameras to 1 indoor monitor is
required for dual entrance monitoring at least.
Show DOOR1 image
Show CAM1 image
Show DOOR2 image
Show CAM2 image
Door1 Door2
Camera1 Camera2
Monitoring Transfer Recording
Setting At home Lock
2021-11-16 12:24
If a conversation with an outdoor camera is underway in monitoring mode, during this period, the
visitor presses the call button on another outdoor camera, the message “Door calling” will be
displayed on the screen.
Monitoring Transfer Recording
Setting At home Lock
2021-11-16 12:24
Press the “Transfer” icon.