User's Manual
In standby mode, touch the screen anywhere to access the main menu, press “ ” to enter the next
menu interface, option “ ” and “ ” to make outdoor bell monitoring, option “ ” and “ ” to
make CCTV camera monitoring.
On monitoring mode, to set up below Setting.
[ ] Zoom out, touch this button to zoom out.
[ ] Monitor, touch this item to switch the monitor image to other channels.
[ ] Capture, touch this item to capture a frame of the current video stream as a still photo.
[ ] Record, touch this item to start manual record, and press it again to stop manual record.
[ ] Unlock, touch this item to release the door lock connected to the outdoor bell.
[ ] Unlock, touch this item to release the door lock connected to the indoor monitor.
[ ] Talk, touch this item to activate conversation mode.
[ ] Indoor monitor call volume setting, when the monitor and outdoor dell are in intercom state,
use this item to adjust the volume of the indoor monitor. Color setting, to setup the image brightness,
contrast and saturation, the value can be set up between 0 and 50.
[ ] Hang up. In conversation mode, touch this item to end the conversation.
[ ] Zoom in, touch this button to zoom in.
Camera1 AHD1080P SD
CAM1 2021/11/16 17:00:30
On main menu touch the “Setting” option to enter the “Setting” menu. Press “ ” to return to previous.
Note: After modifying the parameters, the settings will be saved when the monitor is in standby mode.
On System setting menu, to set up Time, Date format, Standby clock, Language, Keytone, Weather,
Door panel backlight, and Indoor unlock delay.
[Date format]: Use this field to set up system date to be YY-MM-DD or DD-MM-YY or MM-DD-YY.
Press “ ” or “ ” to modify.
[Standby clock]: Enable or disable the standby clock display function. Options include Off, 10S, 30S,
60S, 120S and 180S. When "Standby Clock" is set to "Off", the screen will always be black in standby
mode. “10S/30S/60S/120S/160S” mean that in standby mode, the screen saver clock will be displayed
on the screen for about 10 seconds, 30seconds, 60 seconds, 120 seconds and 160 seconds.
[Language]: Use this field to change the language of the device menu text and the on-screen display.
Press “ ” or “ ” to modify.
[Keytone]: Enable or disable the keyboard sound when touching the screen. “ ” means enable,
“ ” means deactivate.
[Weather]: Enable or disable the weather function. If the weather function is enabled and the standby
clock is turned on, after the indoor monitor is successfully connected to the Internet, when the indoor
monitor is in standby mode, the local weather, temperature, pressure, humidity and system clock will
be displayed on the saver screen.
[Door panel backlight]: If the outdoor bell supports backlight function, user can enable or disable this
function. “ ” means enable, “ ” means deactivate.
2.1 Outdoor bell and Camera monitoring
2.2 Set System Parameters
2.2.1 Setting-System setting
13
14
On the monitoring mode, device shows following interface.
[Time]: Use this field to set up system date and time.
Touch “ ” to enter time setting interface, press “ ” or “ ” to modify the parameters, press
“Ok” to confirm, press “Cancel” to cancel.
<
<
<
<
<
<
System setting
Device_id
Time
Date format
Standby clock
Language
1
2021-11-16 09:45
YY-MM-DD
60 Sec
English
<
<
<
<
<
<
Keytone
Weather
Door panel backlight
Indoor unlock delay 2 Sec
<
<
<
<
System setting
Device_id
Time
Date format
Standby clock
Language
1
2021-11-16 09:45
YY-MM-DD
60 Sec
English
<
<
<
<
<
<
Keytone
Weather
Door panel backlight
Indoor unlock delay 2 Sec
<
<
<
<
Cancel
Ok
Time
<
<
<
<
<
<
<
<
<
<
2021 11 16 09 26
Door1 AHD1080P SD
DOOR1 2021/11/16 17:00:02
Door1 Door2
Camera1 Camera2
Monitoring Transfer Recording
Setting At home Lock
2021-11-16 12:24