Installation instructions

26
If cycle counter (9 0C) is selected, the following is true:
1 00 Represents the number of cycles in HUNDREDS. 1 02
= 200
2 00 Represents the number of cycles in ONES. 2 25 = 225
TOTAL CYCLES = 225
This is ‘VIEW ONLY’ and cannot be cleared.
Press the PERM. PRESS button once to advance
t
o next code.
If money counter (1.0C or 1.C0) is selected, the following is true:
3 00 Number of dollars in HUNDREDS. 3 01
= 100.00
4 00 Number of dollars in ONES. 4 68
= 168.00
5 00 Number of CENTS. 5 75 = 100.75
TOTAL = $168.75
END OF SET-UP PROCEDURES
EXIT FROM SET-UP MODE
■
PD MODELS: Reinstall service access door.
■
PR MODELS: Remove set-up card.
■
PR MODELS where AA1 connector was removed:
1. Unplug dryer or disconnect power.
2. Open console, reinsert jumper into AA1, close console.
3. Plug in dryer or reconnect power.
■
PR MODELS WHERE SERVICE ACCESS CODE WAS USED: Set-
up mode can be exited by using procedures from Service Access
Code (see page 23).
W10135154B EnFrv10.qxd:YB70809-10135134A 4/20/10 2:42 PM Page 26