INSTALLATION INSTRUCTIONS and PARTS LIST for 49971 WHITE 49978 ALMOND STACK STAND KIT FOS USE WITH COMPACT TYPE ELECTRIC AND GAS DRYERS SO MARKED , . ’ STACK STAND KT Key Mo. Description Quantity 1 Dryer Stand Bracket 1 2 Stand Use 3 Dryer Stand Diagonal Brace Dryer Stand Cross Brace Says. Miscellaneous Farts Bag t Make sure kit contains all parts Zarathustra on this page and in chart an page 5. (cantilevered) wd Instruction Sheet 4378891 Rev.
FORTH PROPER ASSEMBLY OF YOUR STACK STAND, LOCATION AND INSTALLATION OF THE WASHER AND DRYER,” FOLLOW STEPS THROUGH E LISTED BELOW. A WARNING Electrical Shock Hazard Disconnect electrical power before servicing. Failure to do so can result in death or electrical shock. A. ASSEMBLE STAND NOTE; Each half of the stand base (2} is identical. 1. Attach one end of dryer stand bracket (1) to the upper heel of one of the Stand bases {2) using one screw (6), and a lock nut (7).
B. PROPER LOCATION Be sure your stack stand kit is properly installed i an appropriate level area and a place suitable for the size, function, and protection of the stack stand and appliance. Use tha stack stand only for the purpose for which it was designed, To prevent restriction of air flow, do not use top uf dryer for storage. The proper location of all utility connections is shown in Figure 6.
Place white sower factors (10) over screws marked Ain Figure 7 MASC and pace the black scow protectors (11) over the remaining 12 E. AUTO TIC WASHER sowers. INSTALLATION With the stack stand and dryer in the selected operating position, the automatic washer may ba installed by carefully following the Installation instructions for your new automatic washer.
LID LATCH NOT ILLUSTRATED Key No. Oty. Lag Screw 12 Lock Nut, Jason a Screw, A/E16 x 34 Key Qty. Screw Protector —White| Screw Protector — Black | Screw. 10-16 x 5/8” Washer Sower, 114-20 Key No. 14 These parts are not Illustrated actual size. Washer Gry.