Use & care guide

Using Laundry Product Dispensers
Add a measured amount of HE
detergent into detergent dispenser.
IMPORTANT: Use only High Efficiency detergents. The package
will be marked "HE" or "High Efficiency." Low-water washing
creates excessive sudsing with a regular non-HE detergent.
Using regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer's instructions to determine the amount
of detergent to use.
HELPFUL TIP: See "Washer Maintenance" for information on
recommended method of cleaning washer dispensers.
a fabric
softener
Pour a measured amount of liquid
fabric softener into dispenser; always
follow manufacturer's directions for correct amount of
fabric softener based on your load size. Then select
Fabric Softener option.
IMPORTANT: Fabric Softener option must be selected
to ensure proper distribution at correct time in cycle.
Do not overfill or dilute. Overfilling dispenser will cause
fabric softener to immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be
dispensed in the last rinse.
NOTE: Do not use liquid fabric softener dispenser balls
in this washer. They will not dispense correctly.
product to dispenser
Liquid chlorine bleach a 1
dispenser oxi treat
stains
Add liquid chlorine bleach or Oxi
laundry boost product to the correct
dispenser, When using Oxi products or
other laundry boosters (liquid or powdered
color-safe bleach), select the Oxi Treat Stain option. It is not
necessary to select the Oxi Treat Stain option when using liquid
chlorine bleach.
Do not overfill, dilute, or use more than 3/4 cup (180 mL)
of liquid chlorine bleach. Overfilling will cause the bleach
or Oxi product to dispense immediately into the washer.
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
Starting Your Washer
6, Press POWER/CANCEL to turn on
washer
power
cancel
Make sure the dispenser drawer is closed completely, then
press POWER/CANCEL to turn on the washer.
10